Look What Mommy Made

A creative, home-made, hand-made blog

How to Make DIY Mint Syrup

DIY Mint SyrupIf you saw my post about how to get a free mint plant, than you’ll love this!


What?! Yes! I tell you, it’s awesome.. if you like mint. You can use flavored syrups in a variety of drinks, and some are even good on ice cream or other desserts. This syrup is something I use in my iced tea, and I love it. LOVE.

It’s super simple, if you don’t think you’ll use a lot, don’t make a whole lot.

What You’ll Need:

A jar, bottle, or other clean, recycled container (I used an empty Amaretto bottle)

1/2 cup Sugar

1 cup Water


After you have a decent sized mint plant, and it’s growing wild, you can start “harvesting” it. I waited until mine started to flower. (Side note: any herb or edible plant has it’s best flavor right before flowering. You can discourage flowering by “pinching”, or cutting, off those buds, which will encourage more branching.)

All I did was take my kitchen scissors and go to town. I didn’t want to cut it back too hard, just in case our wonderful summer weather decided to heat up too much, but I had roughly 1 foot stems on the plant and I cut most of those down to roughly 6 inches. I left some stems longer, and just removed the buds, but I was also making a rather large batch!

I know that crushing the leaves and stems releases the flavor, but I just didn’t want to chop all this mint. I took it by the handfuls and just crushed it by twisting and bending it. Your hands will smell delightfully minty. As will your kitchen. If you aren’t like me, and you want to chop it up, go crazy. Chop up everything. Stems and leaves.

Making Mint Syrup

Get a decent sized pot and add your water and your sugar. If you want more, the ratio is 2 parts sugar to 1 part water. This should produce a fairly syrupy product. If you want it a little thinner, you can add a little more water.

Turn the heat on medium and stir to dissolve the sugar. Once dissolved, turn the heat up to med-high and look for a rolling simmer, not really a hard boil. Once you get there, let it simmer/boil for a few minutes, 2-3. (Side note: It’s SUPER IMPORTANT NOT TO BOIL THIS TOO LONG. A few minutes will do. 2-3.) turn off the heat and remove the pot.

NOW.. Throw in your mint! If you were like me and didn’t chop it up, then shove it in. Stir the syrup and make sure the mint is covered or at least wet. Cover your pot with a lid. The minty flavor oils can evaporate, so try to leave the lid in place. I know how nice it smells, but just leave it.

Leave it alone. For a while. The heat from the syrup will “cook” the mint. After oh, 10-15 minutes, go ahead a take a look inside. The mint should resemble cooked greens, like cooked spinach. It will be darker green than it was when we started. If not, stir it around again and leave it alone again.

If everything looks great, it’s time to strain the mint into our bottle. I used a coffee filter in a funnel. It’s what I had on hand! And it worked!

Making Mint DIY Syrup

Just pour everything into the strainer/filter and funnel, slowly! You don’t want to be over zealous in your excitement for that first minty iced tea and spill syrup everywhere (like me. Cough. Cough).

Once it’s all strained, just squeeze the mint, or push on it with the back of a spoon to get out any extra syrup then throw away the mint. It’s all used up.

TA-DA! You have just made minty syrupy goodness!

Mint Iced Tea

Mint Syrup to taste. I just “eyeball it”, but I’m guessing it’s close to a tablespoon per 16 oz. glass. It might be more or less, just depends on how minty you want it and how strong your tea is! 😉

1 Comment »

Sun Tea: How to Make Tea Using the Sun

Making Sun TeaOkay, so some of you think this is the simplest and easiest thing ever, and you’re wondering why I’m writing about it, others of you are thinking.. “What tea?”

Sun Tea. It’s easy. It’s a very frugal way to not heat up the house with a burner from the stove, and save the energy you would use heating that stove, and the A/C it would take to cool it back off.

And it’s just fun for the kids, a lot of the time!

What You’ll Need:

A Jar (I used a clean pickle jar)

Your favorite tea (in bags or if you want to use loose tea, you’ll need a tea ball/infuser)

Fill the jar with water and throw in your tea bags (or the infuser with your loose tea). Now find a sunny spot outside. Leave the jar in the sun for a while, until you like the strength. It will take a while, depending on how warm it is outside. Now, in Oklahoma, it can get pretty hot, so a few hours will do. But if you live in a place where it’s not as warm, you might be looking at 4 hours or more. This is not a speedy thing.

Sun Tea

Once you like the strength, pull the jar inside and finish it with your sugar (because around here, that’s how we drink it). If you don’t like sweet tea (what is WRONG with you?) than you’re all done!

Kids think this is pretty cool, so its a great thing for them to help you with. 🙂

Leave a comment »

How to Get Your Own Mint Plant for Free

Mint Plant for Free
If you like to garden so that you can really home-make things yourself, than you’ll enjoy this one.

I like mint flavor. I like the smell. I’m not in love or anything, but I find it pleasant, and even enjoy mint tea on occasion. When I found out that mint plants were easy to grow (and I mean, they-turn-into-a-weed-if-you’re-not-careful, easy) I wanted one.

I’ve actually grown it before, having tried sowing it from seed. This is uber difficult. Apparently, mint seeds have a 50% chance of growing, so out of a seed packet, you’ll get lucky if you get 50% of those seeds to grow. (However, germinating the seeds in a paper towel first, does do some good, that’s another post!).

So anyway, if you’re like me, and you’re broke more often than not, You’ll love finding a way to get this plant without paying for it.

Here are some ways to do it:

  1. Ask around! Mint is SO prolific and easy to grow that if someone has ever made the mistake of putting it directly into their garden, they will be digging it up for years and years. Most people that have a decent sized plant will be more than happy to provide you a plant or two.
  2. Ask for a cutting. If your friends or family don’t really have a lot of mint, but they do have a plant. Mint is SUPER easy to grow from a cutting, and I will explain how to do this in a moment.
  3. Freecycle.org : Go look on Freecycle.org and ask for a plant or two. If you’re frugal, you should know all about this site. It’s like an email list/group of people that all post things they want/need or are looking to get rid of. It’s all for free.
  4. Lastly, you can do what I did, and find some!

Okay, so number 4 is pretty vague. What I did was found out that one of my favorite restaurants had mint growing outside. I have been their enough to have seen them hacking at it with a weedwhacker. That smell is distinct. You can’t mistake mint.

So the last time we went to eat there (which was nearly 6 months or more ago, now) I pinched off a decent stem with my fingers. I had planned to do this before we left, so I had a wet paper napkin from dinner. I put the “cutting” into this paper napkin, making sure the “cut” end was inside the wet napkin.

Once I got home, I picked off the last two leaves (make sure you get one that has 3-4 leaf “sets”, for good measure) and I put the cut end into a cup of water. I also made sure the area I had picked the leaves off was in the water, because this is where the roots will shoot out from first. I put it in my window and made sure to keep the water at the same level.

Growing Mint in a cup

After about 2 weeks, I had roots, and the plant was ready for the outdoors! TA-DA! Mint plant for free.

Growing Mint

Here, you can see the roots starting to grow.

Now all you have to do is get some soil (I used top soil), poke a hole, put the plant in, and cover. Water regularly until you begin seeing new growth (which won’t be long). Once it gets in there, it will start going crazy! It likes sun, so put it somewhere sunny!

Growing Mint

I put mine into cinder blocks, as part of a raised bed. This will keep it from spreading anywhere I don’t want it!

Good luck on your search!


How to make DIY Applesauce

Making-ApplesauceDo you have some Ugly Apples? You know what I mean, maybe they sat on your counter or in your fridge, neglected and forgotten. Maybe they were home grown, so they aren’t all perfect and pretty.

I hate the thought of throwing out good food. (Think of those kids that don’t ever get to eat, besides the money that you’re wasting!) Well, here’s a solution for those apples that people might have otherwise thrown out. Are you ready?

Make Homemade Applesauce

..In your crockpot, no less!

I peeled..

Making Applesauce

..cut, and cored these apples into regular size pieces.

Making Applesauce

Then I added them to the crock pot with the water, sugar, and cinnamon.

Making Applesauce

I covered with the lid and turned it on to cook all day (8 hours on my machine). I was going to be home so it didn’t matter how long it took, to me.

Essentially, all you’re trying to do is get the apples mushy. Once they get there, all you need is a masher (or a fork if you only have a few apples) and mash them all up. I liked the long time, low temp method, mashing when I thought they were soft enough, then I cooked it longer. It made the house smell AWESOME. I just kept mashing until I got it to a smoothness I liked.

Voila! You’ve just made applesauce! Once you’ve made it the first time, you can always take away some of the sugar, or add more cinnamon, or take out the cinnamon, you know? Play with it a little. You won’t be disappointed!

Plus, it’s a healthier alternative to the “high fructose corn syrup” they put into regular applesauce. ENJOY!


7 apples (whatever kind you want. Mine were Fuji.)

1 1/4 cups water

1/4 cups sugar (add a few tablespoons of brown sugar for a darker, different flavor)

1 teaspoon of cinnamon


12 DIY Drinks for New Years

12 DIY drinksYeah, I said it. DIY Drinks. I’m cheap. lol. Don’t get me wrong, I love going to the bar and having some fun, but when you’re a mom and dad and you don’t have 50$ to drop at said bar, you don’t have as much fun. So enters the “get together”.  You find someone to watch the baby and you get people to come over. I love entertaining so this is fun for me. 🙂

Since New Years is coming up, I thought this would be a great post.

12 DIY Drinks for New Year’s Eve (in no particular order)

  1. White Russian – A classic cocktail made with coffee liqueur (Kahlua), vodka and either cream or milk. I generally make it in a “lowball” or 8 oz glass filled with ice, and poured with 1 oz vodka and 1 oz coffee liqueur, topped with milk. Of course, you can play with the amounts til you like it.
  2. Wine Spritzer – wine (any wine, cheap, expensive, whatever) and sprite, or club soda or 7 up, if you prefer.
  3. Mind Eraser – Lowball glass filled with ice. 1 1/4 oz coffee liqueur (Kahlua), 3/4 oz vodka, splash of club soda.
  4. Rum and Coke – Lowball glass, filled with ice, 1 oz rum, top with coke.

    DIY Drinks and cocktails

    pictured White Russian and Rum and Coke

  5. Jello Shots – Boil one cup of water and dissolve one box of jello (whatever flavor) in it. Then add one cup of ice cold vodka. Pour in small flexible cups (for easier release) and chill. Try “Jolly Rancher”; watermelon jello and green appleschnapps. Or try “Peach Pie”; rum and peach jello.
  6. “Hot Apple Pie” shot – 3/4 oz green apple schnapps with 1/4 oz cinnamon schnapps floated on top. Best shot ever.
  7. Jager and Red Bull – fill a glass with ice and pour 1 oz Jagermeister and topped with Red Bull.
  8. Beachcomber -1 1/4 oz Vodka, 1/4 oz Coconut Rum, 1/2 oz pineapple juice, 1/4 oz orange juice, serve in a martini glass.. or whatever.
  9. Death by Chocolate -1 oz vodka, 1 oz Creme De Coco, 1 1/2 oz cream, 3 scoops chocolate ice cream, blend with ice and pour in a glass.
  10. Screwdriver – 1 oz vodka, top with orange juice. Another one that you can play with until you like it.
  11. Black Russian – Nearly the same as a White Russian, only you leave out the cream or milk. 1 3/4 oz vodka, 3/4 oz Kahlua. Stir.
  12. Mimosa – 3 parts champagne to 1 part orange juice. (Like 3/4 cup champagne to 1/4 cup orange juice.)

For those of you that aren’t sure, 1 oz is equal to one shot glass. I tried to keep this list down to a simple list of alcohol, because if you’re like us, you may not have the ability to actually go out and buy everything you need for all the “coolest” drinks.

I hope you all have responsible fun!

Happy New Years! 🙂

-Roxanne, LWMM

Leave a comment »

3 DIY Gifts for Christmas

DIY Gifts for Christmas

Well, I’ve been away for a while, what, with the holidays and family and craziness. So I thought to make up for the lost time, I would share 3 projects in one post! 🙂

Make Your Own Personalized Mug1.) DIY Personalized Mugs – Porcelain paint pens (or sharpies), mugs, and oven at 350 degrees for 1 hour. Leave alone over night.

Make your own skull shirt2.) DIY Skull T-shirt – Two old shirts, one stenciled and cut out, then sewn together.

DIY Coffee Creamer Sample Gift

3.) DIY Coffee Creamer Sample Gift – Small glass bottles, a little of your favorite coffee creamer, then freeze. Do this with 3-6 creamers and leave in freezer until you are ready to give away.

Hope you enjoy! Let me know what you think, or if you have any ideas that use these projects! I’d love to hear about them, or maybe even feature them! 🙂

-Roxanne, LWMM

Leave a comment »

DIY Personalized Mugs

Here’s a fun one. My mother has drank coffee since I can remember. In fact, I remember making her coffee when I was young, and carefully trying to walk with the cup back to her bedroom without spilling it, to wake her up in the morning. My brother and I both did this all the time. So now, I’m older, and I, too, appreciate coffee. So when my mother asked for coffee mugs this year for Christmas, you know that I had to make something, and it had to work with my non-existent budget. 😉

So here we go!

What You’ll Need:

  • Mugs from a thrift store, white or light colored
  • Sharpies or Porcelain Pen
  • Oven

So this is super simple. Get some mugs from a thrift store. Our local Salvation Army has plenty of houseware items like this, and I scored a set of four matching mugs for less than 2$. My husband and I have somehow managed to accumulate what seems to be hundreds of Sharpie markers, so I had no problem there. (BUT I did end up buying paint pens, and I’ll explain why later).

Clean your mugs and remove any stickers from the store. I ran mine through the dishwasher and sanitize cycle. Find some quirky sayings, or your favorite quotes, or anything you want to write or draw on your mugs. Preheat your oven to 350 degrees. Now, go ahead and draw or write on your mugs.

Once your oven is heated up, use a shallow pan or cookie sheet to place your mugs on. Then pop them in the oven and wait. I heated mine up for 30 minutes. The first time. I say the first time because after I pulled out the first mug and let it cool for an hour or two, the sharpie scratched right off when I used my fingernail. This freaked me out a little, so I bought those paint pens. HOWEVER, after I did the other 3 mugs with the paint pens, and I was ready to clean the first mug off and try again, the sharpie wouldn’t come off! I scrubbed it, and ran it through the dishwasher and it wasn’t coming off. EVENTUALLY, using LOTS of elbow grease and a “scratchless” scrubby sponge, all of the sharpie came off and I redid the mug with the paint pens to match the others. (But it was apparent to me, that the sharpie method was just fine!)

On the other three mugs, I did use 350 degrees for one hour and I recommend leaving your mugs overnight before throwing them into the dishwasher. They ARE dishwasher safe! (Especially if you use the paint pens)

Have fun! These are really fun, and if you have older kids, they can make some, too, for the perfect permanent artwork. 🙂

-Roxanne, LWMM


DIY Coffee Creamer Sampler Gift

In my post, DIY Personalized Mugs, I talked about my mother’s love for coffee. Well, since she asked for coffee mugs, I wanted to add something to make it even cuter. So, since I recently bought myself some International Delight York Peppermint liquid coffee creamer, it gave me an idea. I could put a few “samples” of coffee creamers into her mugs. I don’t know if she has tried the ones I plan to give her, but I know my mom’s tastes, and I figure she’ll either like them or she’ll have tried them already! 😉

What You’ll Need:

  • Small Bottles or Jars
  • Coffee Creamers

So, anyway, I had an empty sample bottle from a company that sent me a sample syrup, and decided it would be perfect. You can collect a few from Cracker Barrel, with their glass maple syrups, or you can find them all over the place. Find something cute and go with it. You just want to make sure they are small and not too big. Its supposed to be a “Sample Pack”.

I cleaned my bottles and took off the stickers. If you need to, use a razor to get off anything particularly stuck. Alcohol, q-tips/cotton balls, and a razor work well for this.

After the bottles were clean, I poured in my creamers as I opened them. Since I don’t regularly have two or three open at once, I did this over a period of time. Since I knew it was going to be a Christmas gift, I began this in November, freezing the creamers until I am ready to give them to her. I wrote what each one was on the bottle. (And that isn’t so pretty, but you can make it prettier using your own stickers and a printer, or prettier handwriting! :p.)

Once you have as many creamer samples as you want to make, freezing as you go, if you did it like me, then you will want to package them up! I plan to simply place them into the DIY mugs that I have made and wrap them up with little gift bags or tissue paper and ribbon.

Have fun with it. You can even make DIY syrups instead, and use those! Happy Holidays!

-Roxanne, LWMM

1 Comment »

DIY Boys T-shirt

DIY Skull TShirtSo I was on Twitter and happened to see this project for a DIY skull tshirt for boys, that had actually been adapted from this project.

However, I didn’t like the results of the first project and was worried my son would end up ripping the fabric with the second, adapted tshirt project. So, I adapted that one into my own! 🙂

Needless to say, kids grow fast. Super fast. Ridiculously and super-humanly fast. Their clothes don’t last long. So this tshirt project sounded great, because it was reusing old shirts. However, when I thought about it, I realized if I used old shirts, my son would, maybe, get to wear this thing once. So I used two old shirts of mine. They were just old unisex shirts that I had used for yard work. Nothing special and I was getting rid of them anyway.

So here’s what I did;

What You’ll Need:

  • Two T-shirts
  • Needle
  • Thread
  • Stencil or design
  • Washable marker or chalk
  • Sharp scissors

First things first; if you’re using a shirt with any graphics, turn it inside out. I had a red shirt and a white shirt. I liked the idea of white showing under the red, so I had to flip the red one inside out because it had a logo on the front.

After flipping the shirts to their desired side, I sewed my shirts together. I hand sewed along the seams down the arms, around the arms, along the bottom seam, and along the back of the collar. I didn’t want to fuss with one cut up, holey shirt in my washer, so I sewed them together.

DIY Skull TShirt

Stitch along the seams of both shirts to keep them attached. I sewed them using black thread to have it stand out.

Now came the fun part; you’ve got to draw a design, or else use a simple one from the internet. A friend of mine suggested using pumpkin carving templates, and that sounds marvelous. I free-handed a skull face onto some blank paper.

DIY Skull TShirt

Create a stencil by drawing out your design on paper, then cutting out the pieces you want to use as your stencil. Use chalk or a marker to trace this image onto your shirt.

Once you’ve got your drawing or template, you need to transfer it to your shirt. I did this by cutting out my drawing and using it as a stencil. I just happened to have chalk, so I used that to draw the stencil on the shirt.

Once you have traced the image onto your shirt, then you just have to cut out the image out of the top shirt. If you cut both shirts, you’ll end up with just a bunch of holes! After I made mine, I realized it might have been easier to cut out my image BEFORE sewing the shirts, but oh well. 🙂

Once everything has been cut out, I sewed along the image. Not only did this look cool (to me), but it will help keep the shirts from being torn up as easy. Use your own judgement, but this is what I did. 🙂

DIY Skull TShirt

Sew along the image to help keep it from tearing up.. if you want.

Now you’ve made a skull t-shirt! You can use any image, but after this one, I suggest using something with big holes, like the eyes in my skull face. Those teeth were HELL to cut out and worse to trace! It WAS worth it, but I will be making two more shirts, and I am avoiding intricate designs!

These would be great for Christmas gifts, and totally personalizable. If you use a sewing machine, these would be super quick and easy. They look a lot like some shirts I’ve seen at a major retail store. I loved the look. 🙂

Have fun!

-Roxanne, LWMM

1 Comment »

How to Make a Paracord Dog Collar (Double King Cobra Knot)

How to Make a Paracord Dog Collar

In my house, my husband, 13 year old son, 9 month old son, and I practice survival skills. For fun. Yes. We do this. No, we are not “preppers”. We don’t have an underground bunker or a pool turned into a pond. We DO have a stocked fridge, and pantry staples, but I couldn’t tell you that it’s anything like 6 months worth.

What I mean when I say that we practice survival for fun is that we practice camping in tents, by the lake. We make fires, and eat wild plants (although out of all of us, I’m the only one that could tell you about plants that are edible. And its only because I am very interested in gardening). My husband takes my 13 year old hunting on occasion and I have been as well. So when I say that we practice survival, I mean that we know the basics of how to survive outdoors for at least a few days, if we ever had to. You just never know.

So, onto why we are making paracord dog collars. Paracord is great for “cordage”. It can be used to get down steep hills, or up them. It can help you carry items on your back. It can become a hammock to keep you off the ground. It can help you make a shelter. So, having as much as you can is a good idea. If our dogs got stuck with us (say, after a tornado that oklahoma is famous for), we would be able to use the cordage for a variety of things, if we needed to.

Now, that you know why, here is how we (read: I) did it.

What You’ll Need:

  • Measurement of your dog’s neck. (I did this by wrapping a string around the neck as tightly as it should be, and putting that length of string next to a tape measure to find the amount of inches.)
  • 550 pound strength paracord (we get ours from our local army surplus store), read on for amount needed
  • Plastic or Metal buckle appropriate in size to your dog

We have two 50-lb pit bulls, so we wanted the collars to be decently wide. We chose the Double Cobra, or King Cobra, or Double King Cobra knot (it has a few names) for this, since it comes out wide, and also allows for quite a bit of paracord (about 40 feet, total, per collar). When I measured the dogs’ necks, I came up with 20 inches for both dogs. So this let me know I needed about 40 feet of paracord; 20 feet of each color.

To begin, you’ll need to take the ends of your two colors and burn them with a lighter, to stick them together. Just hold the lighter to the ends of both colors and then stick them together while they are still hot. They will stick together, and once they are cool, make a good bond. Once you have accomplished this, you will take the loop and put it through the end of the buckle. String the OTHER ends (the ones that have not been burned together) through the loop you just made with the burned ends. [Sorry I didn’t take a picture of this!]

Now, take those ends and loop them through the other end of the buckle. (Note: there are many ways to do this, but I prefer to keep my buckle clipped together and make my knots)

At this point, I put the “collar” around my dog’s neck and tightened it where I wanted it, then held it tight on the end where the cords are loose. The first knot is difficult, but this is how I do it! YouTube has LOTS of videos. (Maybe I should have made one? hehe) Below is a slideshow of what I did.

This slideshow requires JavaScript.

There you have it! It can be confusing.. and don’t get discouraged. I restarted the black and red collar 3 times!! And I had almost finished it ALL THREE TIMES! That one took me about 2 weeks to finish because I had to just stop for a few days. 🙂

If you have any paracord projects you’ve made, PLEASE share them with me! I would love to pin them, and/or try them, too! 🙂
Have Fun!

-Roxanne, LWMM